Reasons Your Water Heater Isn't Functioning

Instant Quote

Are you currently searching for help around Hot Water Heater Repair?


How to Troubleshoot and Repair an Electric Water Heater
Many modern-day houses make use of an electrical water heater for their heating system, as a result of its benefit and convenience of use. However, similar to any other electrical appliances, issues may develop with its usage, all of a sudden. It can be really irritating to awaken to a chilly shower as opposed to a hot one or having your bathroom with water that isn't warm sufficient or perhaps too hot. Whatever the instance might be, water heater problems can be fairly nerve-racking. The good news is, we've made a checklist of possible options to your water heater problems. There are a variety of elements that can cause many of these troubles, it could be a problem with the power supply, the electrical burner, or the thermostat. Prior to doing anything, ensure you switch off the main power supply for security. Whatever the trouble is, getting it repaired need to not pose too much of a problem if you adhere to these actions:

Check Your Power Supply:


As standard as this may seem, it is really necessary. Without appropriate power, your hot water heater will not work. So the first thing to do when your water suddenly retires is to validate that it isn't a power problem. Inspect if the fuse is burnt out or the circuit breaker tripped. If the breaker is the problem, merely turn it off and on once more. Change any damaged or damaged fuse. Check the device with power after these adjustments to see if it's currently functioning.

Check the Heating Element in the Water Heater:


If it's not a power issue, then attempt looking into your burner if it is still working. Test each of your heating elements to be sure the problem isn't with any of them. If any of them is defective, replace that part and after that inspect whether the warm water is back on.

Inspect Your Thermostat:


If your water heater still isn't working or the water coming out isn't warm sufficient, you might require to examine the temperature level setups on your top thermostat. Make sure the breaker is turned off before doing anything. Open the gain access to panel and press the red button for temperature reset above the thermostat. This should help warm the water. Transform the breaker back on and check if the problem has actually been settled.

Call A Professional:


If after replacing all damaged components and also resetting your temperature level, the hot water heater still isn't working, you may require to speak to a professional plumber for a professional opinion. The trouble with your heating unit could be that the hot and cold taps have actually been switched over or it may be undersized for the amount of hot water required in your house. Whatever the situation may be, a professional plumber would certainly assist address the trouble.

Final thought


Water heater problems are not constantly significant. A lot of them are due to small problems like a blown fuse or worn-out burner. Changing the damaged parts should suffice. Nevertheless, if you are still unable to address the issue, give a call to your closest plumber to come to get it dealt with.

8 possible reasons why you have no Hot Water


Along with streaming Netflix and having light flood a room when we flick a switch, having hot water flow from our taps and showerheads whenever we want is an oft-overlooked modern miracle of homeownership. That's why, when that flow goes cold, it can be shocking — and not just in a "Wow, that's freezing" kind of way while you're in the shower.


Water Leak


Before hot water reaches your taps and showerheads, it needs to spend some time in your water heater. This appliance, which can be either gas- or electric-powered, takes the cold water that enters your home from your well or utility company and cooks it until it gets hot. It's akin to an electric tea kettle.



Obviously, if your water heater is leaking, it will never fill with water so it won't have anything to warm. To see if this is the case, simply examine the area around the water heater to see if it is wet. If so, you'll likely need to replace the unit, but you can also call in a pro for a second opinion and to see if it is fixable. Sometimes leaks can happen around fixtures on the water heater, and if so, the solution might be as simple as replacing them.


Gas Heater: Gas Leak


If your hot water is fueled by natural gas and there is a leak in the supply line or where the line enters the tank, the appliance won't have the power it needs to heat up your water. The result is not only inconvenient, but it can be extremely dangerous as well. If you smell gas when you investigate your water heater, call your gas utility company immediately and report it as an emergency. It might also be prudent to leave your home until a repair person from the company arrives. Your utility company will usually fix any kind of gas leak. However, in terms of getting your water heater working again, you'll need to relight the pilot and wait a while to see if it is functioning properly. You can call in a water heater specialist or plumber to help with this.


Gas Heater: Pilot Light Problems


There are two other issues with gas-powered water heaters that can lead to a loss of hot water. The first is a pilot light that's blown out. The pilot light is the source of a constant flame inside your water heater. When the heater determines the need to heat up the water it is holding, it will open a valve that will cause gas to flow over the pilot light and cause it to ignite. To see if your pilot light is functioning, there is usually a small window in the front of the water heater. If you can't see a flame, remove the access panel and see if that helps you locate it. If there is still no flame, you'll need to relight it in accordance with the manufacturer's instructions.



Your pilot light should burn with a bright blue flame. If not, make sure there are no drafts affecting it, which could keep it from functioning properly. If the flame looks yellow, it might be a sign of the presence of carbon monoxide, which spells trouble and needs to be looked at right away by a technician.


Gas Heater: Faulty Thermocouple


The second reason why a gas-powered water heater might fail is a faulty thermocouple. This is a small probe that should sit in the pilot light flame. Its purpose is to stop the flow of gas if it senses that the pilot light is out. Sometimes, these probes get knocked off track, so make sure it is directly in the flame. They can also get a buildup on them that prevents their function, so try cleaning yours off with some steel wool or fine-grit sandpaper. If your pilot light won't stay lit and you've tried these steps to fix the thermocouple, it is likely faulty and needs to be replaced. Call a technician.


Electric Heater: Breaker Blues


Electric water heaters don't have pilot lights, because there is no gas to burn in order to heat up the water. Instead, they do their magic through the use of (naturally) electricity. But that's not to say things can't go wrong with them. If your electric water heater isn't working properly, there's a good chance that a breaker was tripped that supplies the appliance power. Check your breaker box and flip any breakers that have switched to the off position back on. If it trips again, then there might be a fault in the water heater, and you'll want to call in a pro to have a look.


Electric Heater: Reaching The Limit


If the breaker is fine, check to see if the high-temperature limit has switched off on the water heater itself. To do so, first turn off the breaker to the unit. Then remove the service panel and press the red button you'll find there. This is the limit switch, and resetting it could solve your problem. To check, replace the panel, turn the breaker back on and listen to see if the water heater is functioning again.


Electric Heater: Heating Element


If these steps don't fix the issue, then you might have a failed heating element, which will need to be replaced. Unless you are comfortable with such repairs, calling in a technician might make the most sense.

https://www.homeserve.com/en-us/blog/home-improvement/no-water-heater/


No Hot Water — Water Heater Repair

We hope you enjoyed reading our excerpt on No Hot Water — Water Heater Repair. Many thanks for taking time to read through our article. Do you know another person who is curious about Hot Water Heater Repair? Feel free to promote it. Kudos for your time. Visit us again soon.




Need Help? Hire Us Now!

Leave a Reply

Your email address will not be published. Required fields are marked *